1750-A

From GRWiki
Revision as of 21:23, 21 May 2024 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
General Radio 1750-A
Sweep Drive
General Radio 1750-A Sweep Drive

Available from 1956 to 1968

Manuals
Catalog History
 Document Year Page
Catalog O 1956 200
Catalog P 1959 149
Catalog Q 1961 144
Catalog R 1963 127
Catalog S 1965 153
Catalog T 1968 216
(All manuals in PDF format unless noted otherwise)

The General Radio 1750-A Sweep Drive was introduced in Catalog O (1956) and remained available through Catalog T (1968).

The Type 1750-A sweep drive is designed to mechanically sweep an oscillator through a flexible universal coupling. The sweep action is reciprocating motion of the attached oscillator's frequency control.

Front-panel controls are available for sweep arc, sweep speed, and manual rotation. The sweep drive provides two synchronized circuits, a horizontal voltage for oscilloscope deflection, and a blanking circuit which eliminates the return trace. With the mechanical sweep and the auxiliary circuits, an oscilloscope display is possible. For every cycle of the oscillator sweep, a blanking signal and horizontal deflection voltage are created. The blanking signal is produced by a synchronized, cam-operated blanking switch. The synchronized oscilloscope horizontal voltage is produced by the oscilloscope deflection rheostat. A set of limit switches are designed to stop the sweep motor if the limits are exceeded. One limit is fixed, the other is adjustable.

A system comprising the 1750-A sweep drive, an oscillator, and oscilloscope are used to create a spectrum display for the device of interest. The device can be a filter, amplifier, network or radio receiver.

Not all oscillators are compatible with the 1750-A, check the oscillator manual for compatibility.

Specifications

  • Reciprocating Output Shaft
  • Center Position: adjustable within 9 turns
  • Sweep Arc: adjustable from 30 to 300°C
  • Torque: rated max 24 ounce-inches
  • Sweep Speed: Adjustable 0.5 to 5 Hz. (Moment of inertia of load limits maxsafe speed.)
  • Flexible Coupling
  • Length: 5-¾ inches
  • Coupling Limits: shaft diameters ¼ and ⅜ inch; knobs and dials from 1 to 4 inches
  • Limit Switch: one limit fixed, the other adjustable within 9 turns
  • Sweep Voltage: 2.5 V peak to peak, ungrounded  
  • Blanking: shorting contact closed during clockwise rotation of driven shaft; ungrounded

Links

Photos