1236: Difference between revisions

From GRWiki
Jump to navigation Jump to search
No edit summary
Line 33: Line 33:


* [[Media:GR Exp 1236 07_1967.pdf|Experimenter describing Type 1236 July 1967]]
* [[Media:GR Exp 1236 07_1967.pdf|Experimenter describing Type 1236 July 1967]]
* [[Media:RCA 7586 Data Sheet.pdf|RCA 7586 Nuvistor Data Sheet]]


==Photos==
==Photos==

Revision as of 11:42, 1 April 2024

General Radio 1236
if amplifier
General Radio 1236 IF Amplifier

Available from 1968 to 1978

Manuals
Catalog History
 Document Year Page
Catalog T 1968 119
Catalog U 1970 136
Catalog73 1973 215
Catalog78 1978 41
(All manuals in PDF format unless noted otherwise)

The General Radio 1236 IF Amplifier was introduced in 1968 Catalog T and remained available through Catalog78 1978.

The Type 1236 is an amplifier operating at a fixed frequency of 30 MHz and a 0.5 or 4 Mhz bandwidth. Its a hybrid design with the preamplifier using 7586 Nuvistors and a transistorized post amplifier. A adjustable precision attenuator is located between the amplifiers. It also contains a power supply for a unit oscillator. The Type 1236 with the proper unit oscillator and mixer 874-MRAL comprise a heterodyne detector. A front panel control is used to adjust the output of the connected unit oscillator by varying it's plate voltage. The rear panel contains the 30 MHz amplifier output and binding posts supply demodulated signal output. Applications for the 1236 include direct null detector at 30 MHZ, with external oscillator and mixer a heterodyne detector or a relative signal strength meter.

Specifications

  • Center Frequency: 30MHz
  • Bandwidth (approximately): wide band 4 MHz; narrow band 0.5 MHz, selectable by panel switch
  • Noise Figure: Typically 2 dB
  • Attenuator Range: 0 to 70 dB in 10 dB steps
  • IF Output: 0.5 V max into 50 Ω

Links

Photos