The General Radio 941-A Toroidal Transformer was introduced in Catalog M (1951) and remained available through Catalog S (1965).

General Radio 941-A
Toroidal Transformer
General Radio 941-A Toroidal Transformer

Available from 1951 to 1965

Manuals
  • Manual Needed.
Catalog History
 Document Year Page
Catalog M 1951 229
Catalog N 1954 231
Catalog O 1956 234
Catalog P 1959 235
Catalog Q 1961 237
Catalog R 1963 205
Catalog S 1965 255
(All manuals in PDF format unless noted otherwise)

The Type 941-A is toroidal wound matching transformer operating at audio to ultrasonic frequencies. This transformer is designed for use as an impedance-matching and bridging transformer in low-level 600 Ω communication circuits.

The table below summarizes the specifications and connections for the desired output impedance and frequency response.

Specifications

  • Primary Impedance: 600 Ω
  • Zero Signal Inductance: inner windings, in series, at least 5 henry; outer windings, in series, at least 20 henry
  • Resistance: inner windings in series, 9 Ω; outer windings in series 34 Ω (approximately)
  • Distortion: varies with power; <1% at 1.26 W, <.5% at 1 W, <.2% at .5 W, <.1% at 3m mW


Type 941-A Frequency and Impedance Ranges
Output
Impedance
Frequency
for 1 DB Drop
Flat Insertion
Loss less than
Input
Connections
Output
Connections
9600 Ω 80 Hz - 100 kHz 0.3 dB H4 & L1 H8 & L5
2400 Ω 20 Hz - 135 kHz 0.2 dB H4 & L1 H8 & L5
2400 Ω 80 Hz - 340 kHz 0.2 dB H4 & L1 H8 & L5
600 Ω 20 Hz - 200 kHz 0.1 dB H4 & L1 H8 & L5
600 Ω 20 Hz - 200 kHz 0.3 dB H8 & L5 H4 & L1
150 Ω 5 Hz - 50 kHz 0.3 dB H8 & L5 H4 & L1
150 Ω 20 Hz - 200 kHz 0.3 dB H8 & L5 H4 & L1
37.5 Ω 5 Hz - 50 kHz 0.3 dB H8 & L5 H4 & L1
  • H = High and L = Low for connection phasing

Links

Photos