724-A

From GRWiki
Revision as of 18:17, 30 May 2024 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
General Radio 724-A
Precision Wavemeter
General Radio 724-B Precision Wavemeter

Available from 1936 to 1945

Manuals
Catalog History
 Document Year Page
Catalog J 1936 57
Catalog K1 1939 161
Catalog K2 1942 176
Catalog K3 1944 147
Catalog K4 1945 149
(All manuals in PDF format unless noted otherwise)

The General Radio 724-A Precision Wavemeter was introduced in Catalog J (1936) and remained available through Catalog K4 (1945).

The Type 724-A is an absorption-type wavemeter with a range from 17 kHz to 50 MHz using seven coils with an accuracy of ±0.25%. The primary application of the 724-A is oscillator and transmitter frequency measurement.

The capacitor used is similar to the Type 722-N Precision Capacitor. It is connected to the inductor through a Type 774 coaxial connector. Resonance is achieved using one of three methods – absorption, reaction, or beat method. Using the panel galvanometer, the absorption method is employed. Regardless of the method, once resonance is achieved, it is a matter of using the correct chart for the coil in use to determine the frequency.

Type 724-A was supplied as a collection of calibrated components sharing the same serial number, i.e. the capacitor, inductors, and calibration charts must have the same serial number to achieve the stated accuracy.

The 724-A replaced the 224-A Wavemeter with improved coils and a galvanometer replacing the thermocouple type indicator. The wavemeter was furnished with a wooden storage case, fitted with lock and carrying handle. This case has compartments for holding the capacitor, inductors, and calibration charts. The 724-A uses a 1G4GT/G triode vacuum tube, resulting in the need for a 1.5 V battery for the heater.

Note: The instrument shown in the photos below uses a 1LE3 loctal battery triode. It appears to be a production change.

Specifications

  • Frequency Range: 16 kHz to 50 MHz using seven inductors
  • Accuracy: ±0.25% between 50 kHz and 50 MHz, 1% between 16 and 50 kHz
  • Inductors: 7 coils wound on isolantite forms and enclosed in molded bakelite cases
  • Capacitor: Precision worm-drive type similar to Type 722
  • Resonance Indicator: galvanometer and vacuum tube rectifier combination

Links

Photos