1432-M: Difference between revisions
(Created page with "Type '''1432-M 111,110 ohm Decade Resistor Box'''. ==Specifications== ==Links== ==Photos== <gallery> </gallery> Category:Resistance Standards") |
No edit summary |
||
Line 1: | Line 1: | ||
Type | {{GR Product | ||
|model=1432-M | |||
|class=resistance standards | |||
|summary=Decade Resistor | |||
|image=GR 1432-M Close-up.jpg | |||
|caption=General Radio 1432-M Decade Resistor | |||
|series=1432 | |||
|introduced=1951 | |||
|discontinued=1965 | |||
|designers= | |||
|manuals= | |||
* [[Media:GR 1432 and 510 Series Resistance Decades.pdf|GR 1432 and 510 Series Resistance Decades Data Sheet]] | |||
{{Catalog History}} | |||
}} | |||
The {{Title|General Radio 1432-M Decade Resistor}} was introduced in {{Catalog M}} and remained available through {{Catalog S}}. | |||
The Type 1432-M is decade resistance box is comprised of five Type [[510]] decade resistance units in series for a total resistance of 111.11 kΩ. The [[510]] decade units use an 11 position switch, the first position shorts the decade the following positions increase the resistance by a factor of 1. The decade switch is what's referred to as a make before break configuration, regardless of the position there's always a continuity at it's terminals. The terminals are Type 938 equipped with a shorting link to the case. The decades are housed in an aluminum case shielded and insulated from its resistance terminals. | |||
See the table below for [[510]] decade units used. | |||
==Specifications== | ==Specifications== | ||
* '''Total Resistance:'''111,110 Ω | |||
* '''Number of Decades:''' 5 | |||
{| class="wikitable" style="margin:auto" | |||
|+ Type 1432-M Installed 510 Decade Units | |||
|- | |||
! Decade Unit Type!! Total Resistance Ohms!! Resistance / Unit Ohms !! Accuracy per increment !! Maximum Current !! Power/step | |||
|- | |||
|[[510-B]] || 10 || 1 ||±0.15% || 800 mA || 0.6 W | |||
|- | |||
|[[510-C]] || 100 || 10 ||±0.05% || 250 mA || 0.6 W | |||
|- | |||
|[[510-D]] || 1,000 || 100 ||±0.05% || 80 mA || 0.6 W | |||
|- | |||
|[[510-E]] || 10,000 || 1000 ||±0.05% || 23 mA || 0.5 W | |||
|- | |||
|[[510-F]] || 100,000 || 10,000 ||±0.05% || 7 mA || 0.5 W | |||
|- | |||
|} | |||
==Links== | ==Links== | ||
* [[Media:GR Exp 1432 and 510 Series 06_1951.pdf|Experimenter June 1951 describing Type 1432 Series]] | |||
==Photos== | ==Photos== | ||
<gallery> | <gallery> | ||
GR 1432-M Front.jpg | |||
GR 1432-M Case Open.jpg | |||
GR 1432-M Side.jpg | |||
GR 1432-M Rear.jpg | |||
GR 1432-M Inside Rear.jpg | |||
GR 1432-M Inside Side.jpg | |||
GR 1432-M Inside.jpg | |||
GR 1432-M Inside Decade B-C-D.jpg | |||
GR 1432-M Inside Decade D-E-F.jpg | |||
</gallery> | </gallery> | ||
[[Category:Resistance Standards]] | [[Category:Resistance Standards]] |
Revision as of 05:28, 30 April 2024
The General Radio 1432-M Decade Resistor was introduced in Catalog M (1951) and remained available through Catalog S (1965).
The Type 1432-M is decade resistance box is comprised of five Type 510 decade resistance units in series for a total resistance of 111.11 kΩ. The 510 decade units use an 11 position switch, the first position shorts the decade the following positions increase the resistance by a factor of 1. The decade switch is what's referred to as a make before break configuration, regardless of the position there's always a continuity at it's terminals. The terminals are Type 938 equipped with a shorting link to the case. The decades are housed in an aluminum case shielded and insulated from its resistance terminals.
See the table below for 510 decade units used.
Specifications
- Total Resistance:111,110 Ω
- Number of Decades: 5
Decade Unit Type | Total Resistance Ohms | Resistance / Unit Ohms | Accuracy per increment | Maximum Current | Power/step |
---|---|---|---|---|---|
510-B | 10 | 1 | ±0.15% | 800 mA | 0.6 W |
510-C | 100 | 10 | ±0.05% | 250 mA | 0.6 W |
510-D | 1,000 | 100 | ±0.05% | 80 mA | 0.6 W |
510-E | 10,000 | 1000 | ±0.05% | 23 mA | 0.5 W |
510-F | 100,000 | 10,000 | ±0.05% | 7 mA | 0.5 W |