1607-A: Difference between revisions
No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
}} | }} | ||
The {{Title|General Radio 1607-A Transfer-Function and Immittance Bridge}} was introduced in {{Catalog P}} and remained available through {{Catalog U}}. | The {{Title|General Radio 1607-A Transfer-Function and Immittance Bridge}} was introduced in {{Catalog P}} and remained available through {{Catalog U}}. | ||
The Type 1607-A in null type instrument designed to measure transfer-functions and immittance at frequencies from 25 MHz to 1.2 Ghz using separate indicator units. It can measure passive devices as well as active devices such as semiconductors and vacuum tubes. An example transfer-function measurement would be the alpha of a transistor at 500 MHz or the immittance of a resistor or network at 1 GHz. Other uses are the measurement of reflection coefficient and VSWR of antennas and transmission lines. As a bridge instrument it requires an oscillator and DNT or heterodyne type detector operating at the frequency of interest. The theory of operation of the Type 1607-A is similar to the [[1602-B]]. | |||
==Specifications== | ==Specifications== | ||
Revision as of 20:25, 27 April 2024
The General Radio 1607-A Transfer-Function and Immittance Bridge was introduced in Catalog P (1959) and remained available through Catalog U (1970).
The Type 1607-A in null type instrument designed to measure transfer-functions and immittance at frequencies from 25 MHz to 1.2 Ghz using separate indicator units. It can measure passive devices as well as active devices such as semiconductors and vacuum tubes. An example transfer-function measurement would be the alpha of a transistor at 500 MHz or the immittance of a resistor or network at 1 GHz. Other uses are the measurement of reflection coefficient and VSWR of antennas and transmission lines. As a bridge instrument it requires an oscillator and DNT or heterodyne type detector operating at the frequency of interest. The theory of operation of the Type 1607-A is similar to the 1602-B.
Specifications
- Frequency Range: 25 to 1500 MHz, with reduced accuracy above 1000 MHz and when flexible line-extension cables (required below 150 MHz) are used
- Measurement Ranges and Accuracy: See manual
Links
Photos
-
-
1607-3130 Storage Box
-
-
-
-
-
-
-
1607-P9 Immittance Indicator
-
1607-P10 & 1607-P11 Multiplier Plates
-
1607-P7-Δ/2 21.5-cm Air Line & 874-WO3 874-WO5 Open-Circuit Terminations
-
1607-P5 & 1607-P6 Range Extension Unit and Support
-
1607-P3 Variable Air Capacitor
-
1607-P7-Δ 43-cm Air Line & 1607-P1 Adjustable Stub
-
1607-3030 Main Instrument
-
1607-3030 Main Instrument
-
1607-3030 Main Instrument
-
1607-3030 Main Instrument
-
1607-3030 Main Instrument
-
1607-P9 Immittance Indicator
-
1607-P9 Immittance Indicator
-
874-U and 874-U-S2 U-Line Sections
-
1607-P7-Δ/2 21.5-cm Air Line & 874-WO3 874-WO5 Open-Circuit Terminations
-
1607-P7-Δ 43-cm Air Line & 1607-P1 Adjustable Stub
-
1607-P2 Tee & 1607-P4 Termination
-
1607-P2 Tee & 1607-P4 Termination
-
1607-P2
-
1607-P2
-
1607-P3 Variable Air Capacitor
-
1607-P5 & 1607-P6 Range Extension Unit and Support
-
1607-P8-2Δ Patch Cord
-
874-R20A Patch Cord
-
1607-P8-4Δ Patch Cord
-
1607-P8-5Δ Patch Cord
-
1607-P8-6Δ Patch Cord
