1001-A: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
* [[Media:GR 1001A Signal Generator 09_1967.pdf|General Radio 1001-A Signal Generator Manual 1001-0100-O (1967)]] | * [[Media:GR 1001A Signal Generator 09_1967.pdf|General Radio 1001-A Signal Generator Manual 1001-0100-O (1967)]] | ||
}} | }} | ||
The '''General Radio 1001-A''' is a standard signal generator introduced in 1951 Catalog M and remained available through Catalog 1973. | The '''General Radio 1001-A''' is a standard signal generator introduced in 1951 Catalog M and remained available through Catalog 1973. | ||
The 1001-A | The 1001-A covers a frequency range 0f 5 kHz to 50 MHz. It has a calibrated attenuator with output 0.1 μV to 200 mV and also 2 V direct output. The internal RF oscillator and turret band switch are removable for servicing. Inside the cabinet is a hex alignment tool for adjusting the oscillator turret coils. | ||
also 2 V direct output. The internal RF oscillator and turret band switch are removable for servicing. | |||
==Specifications== | ==Specifications== | ||
Revision as of 21:46, 23 March 2024
The General Radio 1001-A is a standard signal generator introduced in 1951 Catalog M and remained available through Catalog 1973.
The 1001-A covers a frequency range 0f 5 kHz to 50 MHz. It has a calibrated attenuator with output 0.1 μV to 200 mV and also 2 V direct output. The internal RF oscillator and turret band switch are removable for servicing. Inside the cabinet is a hex alignment tool for adjusting the oscillator turret coils.
Specifications
- Frequency Range: 5 kHz to 50 MHz in 8 bands.
- Accuracy: ±1% of reading.
- Stability: Warmup drift is in the order of 0.25%. Half the maximum drift is reached in approximately 1½ hours.
- Amplitude Modulation: 0 to 80%, continuously variable, indicated on the panel meter to ±10% of reading.
- Modulation Frequency: 400 Hz internal, 20 Hz to 15 kHz external modulation.
- Output Impedance: 10 Ω except the 100 mV multiplier setting 50 Ω, 300 Ω at the 2 V output.
Links
Photos
-
-
Top Deck
-
Bottom Deck
-
RF Unit (Cover Removed)
-
RF Turret Switch
-
Output Amplifier 6L6G
-
Accessory Storage Area
-
Alignment Tool Storage
-
Alignment Tool
