980: Difference between revisions

From GRWiki
Jump to navigation Jump to search
Line 30: Line 30:
* [[Media:GR Exp 980 1419-A 07_1956.pdf|Experiment July 1956 describing Type 980]]
* [[Media:GR Exp 980 1419-A 07_1956.pdf|Experiment July 1956 describing Type 980]]
* [[Media:GR_Exp_980_Series_1457-K_10_1957.pdf|Experimenter October 1957 describing Type 980]]
* [[Media:GR_Exp_980_Series_1457-K_10_1957.pdf|Experimenter October 1957 describing Type 980]]
* [[Media:GR Exp 505 1457-K 10_1957.pdf|Experimenter October 1957 describing Types 505 and 1457-K]]


* '''Notes for table below:'''
* '''Notes for table below:'''

Revision as of 03:40, 20 May 2024

General Radio 980
Decade Capacitor Unit
General Radio 980 Decade Capacitor Unit

Available from 1956 to 1965

Manuals
  • Manual Needed.
Catalog History
 Document Year Page
Catalog O 1956 158
Catalog P 1959 172
Catalog Q 1961 167
Catalog R 1963 157
Catalog S 1965 197
(All manuals in PDF format unless noted otherwise)

The General Radio 980 Series Decade Capacitance Units were introduced in Catalog O (1956) and remained available through Catalog S (1965).

The Type 980 Series decade capacitance units are comprised of four capacitors mounted on a 980-P1 switch. The capacitor values are selected in a "1-2-2-5" combination. For example the values used with Type 980-A are 0.1, 0.2, 0.2, and 0.5 μF. The eleven position switch maintains a combination of the four standard capacitors in parallel to produce the decade of capacitance values. Capacitors using different dielectric materials are used in the series, polystyrene, silvered mica, paper, and moulded silvered mica. The Type 980 decade units are components of Types 1419-A, 1419-B , 1419-K , and 1419-M Decade Capacitors. Also available separately, the switch mechanism without capacitors for service or experimental use under the Type 980-P1.

Specifications

  • Two Terminal Zero Capacitance: 11 pF
  • Three Terminal Zero Capacitance: 5 pF
  • Terminals: flexible leads
  • Maximum Voltage: 500 V


Links

  • Notes for table below:
  • Dissipation Factor is at 1 kHz
  • Frequency Limit is for the maximum voltage
Type 980 Series of Decade Capacitor Units
Type Capacitance
Total
Capacitance
Per Step
Dissipation
Factor
Accuracy
2 Terminal
Accuracy
3 Terminal
Dielectric Frequency
Limit
Code
980-A 1 μF 0.1 μF <0.0002 ±1% ±1% Polystyrene 10 kHz AVAST
980-B 0.1 μF 0.01 μF <0.0002 ±1% ±1% Polystyrene 100 kHz AVERT
980-C 0.01 μF 0.001 μF <0.0002 ±1% ±1.5% Polystyrene 1 MHz AVOID
980-D 0.001 μF 0.0001 μF <0.0002 ±(1% + 2 pF) ±1% -(2% + 4 pF) Polystyrene 10 MHz ALIEN
980-F 1 μF 0.1 μF <0.0003 ±0.5% ±0.5% Silvered Mica 10 kHz ACUTE
980-G 0.1 μF 0.01 μF <0.0003 ±0.5% ±0.5% Silvered Mica 100 kHz AVOWD
980-H 0.01 μF 0.001 μF <0.0003 ±0.5% ±1% Silvered Mica 1 MHz AWAIT
980-J 0.001 μF 0.0001 μF <0.0006 ±(0.5% + 2 μF) +0,(±2% + 8 μF) Silvered Mica 10 MHz ADIEU
980-L 1 μF 0.1 μF <0.005 ±1.5% ±1.5% Paper 2 kHz ADAGE
980-M 0.1 μF 0.01 μF <0.001 ±1% ±1% Silver Mica (Moulded) 100 kHz ADDER
980-N 0.01 μF 0.001 μF <0.001 ±1% ±1% Silver Mica (Moulded) 1 MHz ADDLE

Photos