1363: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
* [[Media:GRwiki 1363 VHF Oscillator 1363-0100-A 04_1968.pdf|General Radio 1363 VHF Oscillator Manual 1363-0100-A 1968]] | * [[Media:GRwiki 1363 VHF Oscillator 1363-0100-A 04_1968.pdf|General Radio 1363 VHF Oscillator Manual 1363-0100-A 1968]] | ||
}} | }} | ||
The '''General Radio 1363 VHF Oscillator''' was introduced in | The '''General Radio 1363 VHF Oscillator''' was introduced in {{Catalog T}} and remained available through {{Catalog 1978}}. | ||
The Type 1363 is a general purpose VHF oscillator covering the range from 56 to 500 MHz. It can be used to drive bridges, slotted lines, impedance comparators, and a general purpose signal source. The oscillator uses the 2C43 Triode with a variable capacitor and and variable inductor tuned circuit. The tuned circuit is the sliding contact type making the 1363 unsuitable for sweep operation. As a member of the unit oscillator group if requires an external power supply, three are recommended Types [[1264-B]], [[1267-B]], and [[1269-A]]. | The Type 1363 is a general purpose VHF oscillator covering the range from 56 to 500 MHz. It can be used to drive bridges, slotted lines, impedance comparators, and a general purpose signal source. The oscillator uses the 2C43 Triode with a variable capacitor and and variable inductor tuned circuit. The tuned circuit is the sliding contact type making the 1363 unsuitable for sweep operation. As a member of the unit oscillator group if requires an external power supply, three are recommended Types [[1264-B]], [[1267-B]], and [[1269-A]]. | ||
Revision as of 03:36, 2 April 2024
The General Radio 1363 VHF Oscillator was introduced in Catalog T (1968) and remained available through Catalog 1978.
The Type 1363 is a general purpose VHF oscillator covering the range from 56 to 500 MHz. It can be used to drive bridges, slotted lines, impedance comparators, and a general purpose signal source. The oscillator uses the 2C43 Triode with a variable capacitor and and variable inductor tuned circuit. The tuned circuit is the sliding contact type making the 1363 unsuitable for sweep operation. As a member of the unit oscillator group if requires an external power supply, three are recommended Types 1264-B, 1267-B, and 1269-A.
Specifications
- Frequency Range: 56 to 500 MHz.
- Calibration Accuracy: ±2%.
- Warmup Frequency Drift: 0.8% typical.
- Output Power (into 50 ohms): At least 90 mW over entire frequency range, 150 mW from 90 to 350 MHz, 250 mW from 150 to 250 MHz.
Links
- Experimenter describing Type 1363 June 1968
- GE 2C43 Lighthouse Triode Datasheet
- RCA 2C43 Lighthouse Triode Datasheet
