1361-A: Difference between revisions

From GRWiki
Jump to navigation Jump to search
No edit summary
Line 14: Line 14:
The '''General Radio 1361-A Oscillator''' was introduced in 1961 Catalog Q and remained available through Catalog73 1973.  
The '''General Radio 1361-A Oscillator''' was introduced in 1961 Catalog Q and remained available through Catalog73 1973.  


 
The Type 1361-A is a general purpose Colpitts type oscillator covering 450 to 1050 MHz. It can be used to drive bridges, slotted lines, impedance comparators, and a general purpose signal source. Direct amplitude modulation at audio frequencies is provided by a front and side panel phone jack and with an accessory crystal-diode modulator [[1000-P6]] or [[1000-P7]], balanced modulator. Sweep frequency operation is provided by the Type [[1750-A]] sweep drive or Type [[907-R144]] Dial Drive. The recommended power supply is the Type [[1203-B]] for basic operation, also available the Type [[1264-A]] Modulating Power Supply and Type [[1263-B]] Amplitude-Regulated power supply.


==Specifications==
==Specifications==
* '''Frequency Range:''' 450 to 1050 MHz.
* '''Frequency Range:''' 450 to 1050 MHz.
* '''Frequency Accuracy:''' ±1%.
* '''Frequency Accuracy:''' ±1%.

Revision as of 02:32, 25 March 2024

General Radio 1361-A
oscillator
General Radio 1361-A Oscillator

Available from 1961 to 1973

Manuals
(All manuals in PDF format unless noted otherwise)

The General Radio 1361-A Oscillator was introduced in 1961 Catalog Q and remained available through Catalog73 1973.

The Type 1361-A is a general purpose Colpitts type oscillator covering 450 to 1050 MHz. It can be used to drive bridges, slotted lines, impedance comparators, and a general purpose signal source. Direct amplitude modulation at audio frequencies is provided by a front and side panel phone jack and with an accessory crystal-diode modulator 1000-P6 or 1000-P7, balanced modulator. Sweep frequency operation is provided by the Type 1750-A sweep drive or Type 907-R144 Dial Drive. The recommended power supply is the Type 1203-B for basic operation, also available the Type 1264-A Modulating Power Supply and Type 1263-B Amplitude-Regulated power supply.

Specifications

  • Frequency Range: 450 to 1050 MHz.
  • Frequency Accuracy: ±1%.
  • Output Power (into 50 Ω): at least 125 mW with Type 1203-B Unit Power Supply,
  • Attenuator Range: 80 dB with 5 dB scale divisions, relative attenuation.

Links

Photos