1114-A

The General Radio 1114-A Frequency Divider was introduced in Catalog Q (1961) and remained available through Catalog S (1965).

The Type 1114-A Frequency Divider is a component of the Type 1105-A Frequency-Measurement Equipment. Its designed to divide the 5 MHz input signal to produce 1Mhz output. Subsequent modules, 1114-P2 thru 1114-P5 each divide by 10. Optional modules 1114-P6 and 1114-P7 provide 400 Hz and 60 Hz outputs. The output from the modules is essentially a sine wave, although 100 kHz and 10 kHz square wave output is available from the 1114-P2 and 1114-P3 respectively. The first divider 1114-P1 is a regenerative 5:1 divider, 1114-P2 thru 1114-P5 are switching type 10:1 dividers. The plug-in modules are designed to only fit in the correct slot. A switch behind the front cover selects the driving signal from 1 MHz 1114-P1 divider and an external 1 Mhz or 100 kHz inputs.

Specifications

• Input: 5 MHz, 1 MHz, 100 kHz, 50 Ω. 1 V ±50%.
• Output: with 5 MHz input
  • Sine Waves: 1 mHz, 100 kHz, 10 kHz, 100 Hz; 400 Hz and 60 Hz optional
  • Square Waves: 100 kHz, 10 kHz
• Spurious Signals: better than 34 db down
• Jitter: less than 500 μs for 100 Hz output with respect to 5 MHz input

Links

• Experimenter April 1961 describing Type 1114-A

Photos

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

GR 1114-P1

• 
• 
• 
• 
• 

GR 1114-P2

• 
• 
• 
• 
• 

GR 1114-P3

• 
• 
• 
• 

GR 1114-P4

• 
• 
• 
• 

GR 1114-P5

• 
• 
• 
•